There are many great things about submersible pumps. They are not noisy when in use and they are easy to maintain. They can be configured into virtually any setup you need them to be in. Here are some tips you can use for industrial pump repair in Winnipeg before bringing it in to a professional.
Non-Starting Motor
If the motor simply refuses to start, there could be a few very simple explanations. The first thing that you should do is check the fuses or the circuit breaker to see if anything has been blown. This is a very common issue and is also a very simple fix. Replace the fuse or reset the breaker and you will be back on your way. If that is not the issue, then you need to check for rust or debris around the area of the pressure switch. Simply use a stiff wire brush to scrub away the remnants and your motor should start right back up again.
It Just Keeps Running
If the problem with the pump is that it runs continuously without ever shutting off, then it may be a leak. Check the pipes to make sure none of them are cracked or otherwise damaged. If they are, they obviously need to be replaced.
Avoid Sunlight
It is crucial to avoid placing the overload protectors in direct sunlight. If they suffer from heat even slightly, they will trip and cause the pump to malfunction. Moving them into shade can help you avoid extensive industrial pump repairs in Winnipeg.
If you need a pump repaired, contact PFP Sales & Service Inc.
