There’s nothing like an in-ground swimming pool to make your summers a relaxing dream. Building your own in-ground pool is not impossible, but it does take quite a bit of planning as well as some special equipment, such as an excavator. You can look into excavator rentals in Vancouver.
Pick a Pool Type
A concrete-lined
pool will require a steel wire frame that is covered over with shotcrete; shotcrete is concrete shot out of a special gun. You can rent a shotcrete gun when you get to this step.
Alternately, you could choose to build a vinyl-lined pool. Vinyl pools use a premade flexible vinyl liner that will be placed into the hole, then attached to a reinforced steel frame.
Check With Local Zoning
In-ground swimming pools require a building permit and need to follow building and zoning regulations. Zoning requirements vary from location to location, so make sure you understand the requirements before you begin.
Pick a Location
Choosing the right spot for your pool is important; you want to take advantage of a sunny location for natural pool heating. Also, shelter your pool from the wind and avoid digging in a low-lying spot or your pool could flood with mud and debris during heavy rain.
Choose a Filter System
There are three common types of pool filters: cartridge, sand, and diatomaceous earth. All three types will work well when properly installed and maintained.
Start Digging
An in-ground pool is a big endeavor, and you’ll need to rent some heavy equipment, such as excavator rentals in Vancouver and a cement gun. You’ll also need to pay special attention to your dimensions, especially if you plan on installing a vinyl pool. Also, the top edge of the pool should be level.
Dynamic Equipment Rentals can provide you with excavator rentals in Vancouver when you visit our website.